PRODUCTS
   > CATV Power Supply
   > UPS & Backup Power
   > Status Monitoring
   > Outdoor Enclosure
   > Smart Power Switch
   > CATV Passive Device
   > SMPS & DC Power
   > Transformer
----------------------------------------
 
  DOWNLOADS
   > Technical Datasheet
   > Product Image
   > Logo & Certification
----------------------------------------
 
   
 
  > MC        > MG        > MG31        > MS        > MS31        > MS33        > SMK
   
  Features
  • Line interactive design
  • Boost and buck AVR (Auto voltage regulation)
  • Fully digitized microprocessor controlled
  • Smart LCD display
  • Energy saving function (UPS sleep mode)
  • 50/60Hz frequency auto sensing and selection
  • On-battery startup (DC power on)
  • Lightning and surge protection
  • Short circuit and overload protection
  • Advanced battery management (ABM technology)
  • Smart RS-232 communication interface
  • Tel/Modem internet surge suppression
  • Site wiring fault warning (available on certain models only)
  • Optional SNMP Adapter
   
  General Specifications*
  Rated Power 1KVA to 5KVA
   
  Input
  Voltage 100, 110, 115, 120, 220, 230 or 240VAC, single phase
  Voltage range ±25%
  Frequency 50 or 60 Hz ±5Hz (auto sensing)
  Output
  Voltage Typical as same as input, ±5% at battery mode
  Voltage regulation

+15% at 75% to 91% nominal input;

    -13% at 109% to 125% nominal input
  Frequency 50Hz or 60Hz, auto-detecting; ±0.5% at battery mode
  Waveform Pure sine wave
  Power factor 0.6
  Overload capacity >110%, shut down in 20s;
    >125%, shut down in 5s.
  Short circuit protection cut off output immediately or input fuse
  Transfer time 2 to 4ms
  LCD display features Line/ battery / inverter status, operation mode,
    input voltage & frequency, output voltage & frequency,
    battery voltage, load capacity, fault
  Battery & Charger
  Battery type Sealed maintenance free (SMF) VRLA
  Charging time 4 hours typical to 90% capacity
  Protection Auto self-test, discharge protection
    Battery replacement indicator
  Communication Interface
  RS-232 Serial interface
  Intelligent slot For installation of status monitoring module
  Mechanical
  Smart display input voltage, input frequency, output voltage, battery
    voltage, load capacity and ambient temperature.
    Operation mode, line, battery and inverter status
  Environmental
  Operating temperature 0 to 40°C / 32 to 104°F
  Storage temperature -25 to 55°C / -13 to 131°F
  Operating humidity 0 to 95% non-condensing
  Elevation 3500 meters / 11480 ft. (max.)
     
  * Please refer to Technical Datasheet for nominal specifications.
  ** Due to continuing improvements, design, layout, specifications and configuration of the     product are subject to change without notice.
       
  Downloads
  Technical Datasheet (A4 / PDF / 116KB)
 
Click to enlarge
 
SMK-2KAL