| |
> SPS-2116 > SPS-5116A > SPS-5116C |
| |
|
| |
Overview |
| |
This device is developed on the basis of SPS-2116 Dual-Line Power Switch. SPS-5116A can monitor and control 5 power supplies and monitor their operating status at the same time. In the event that one of five power supplies that the device controls fails to perform normally, SPS-5116A will automatically get power from a power supply next to the failed one and feed the power to loads of the failed one. This further ensures powering of the entire system. |
| |
|
| |
As SPS-2216 does, SPS-5116A also has an embedded power inserter. |
| |
|
| |
Features |
| |
• Up to 5 power supplies controlled and monitored |
| |
• Embedded power inserter |
| |
• 50 to 70VAC input voltage range |
| |
• 860MHz broadband operation |
| |
• 7A through current rating |
| |
• Aluminum alloy powder coated enclosure |
| |
• Full weather seal with strand clamp for outdoor applications |
| |
• Woven metallic gasket for RFI shielding requirement |
| |
• 5/8" female connections (both input and output) |
| |
|
| |
Nominal Specifications |
| |
Input voltage range |
50 to 70VAC |
| |
Waterproof conditions |
1.0kg/squ. cm 60s |
| |
Operating bandwidth |
860MHz |
| |
AC Current capacity |
7A |
| |
HUM modulation |
≥66dB |
| |
Impedance |
75Ω |
| |
Return loss |
12dB (860MHz) |
| |
Insertion loss |
1.5dB (860MHz) |
| |
NOTE: Due to continuous improvements, design, layout, specification and configuration of the product are subject to change without notice. |
| |
|
| |
Downloads |
| |
Technical Datasheet (A4 / PDF / 153KB) |
